Effective Hacks To Fix DNS Server Not Responding Error

DNS server is the primary part that permits users to connect to the internet and thus provides access to various sites while communicating with the servers. Moreover, it also helps to translate the web address. But sometimes, DNS servers fail to respond and thus error occurs. DNS server not responding is a commonly occurring error that might appear if the default DNS server of the ISP might be temporarily down. 

dns server not responding

In case, you have recently moved to a new server, then also you might encounter this issue. So, if you are one of those who come across this error, then do not panic as you can easily fix this error by going through some easy steps. So, have a look at the below section to know some easy techniques that you can apply to fix this error hassle-free.

Fix DNS Server Not Responding Windows 10 with Premium Solutions:

Keep an eye on the effective solutions cited below to permanently eliminate this error from your system.

Solution 1: Check if the Internet Connection is Stable or Not

Before jumping on to any complicated solutions, we suggest you verify the strength of your internet connection. You can connect other devices such as mobile phones to the same network and check whether you can operate those devices from the same network or not.

If you can successfully do so, then the fault must be associated with the Windows 10 system. However, if you are unable to access the network from those devices, then the problem might be with the DNS server or your ISP. In that case, continue with the next solution. 

Solution 2: Change the DNS Server Manually

When you try to access a particular website, the DNS server automatically gets connected. However, if there is some issue with the DNS server, then you might face this DNS server not responding error.

One way to resolve this issue is to change the DNS server manually. You can easily do it by following the given below instructions.

  • At first, press the Windows and X keys on the keyboard.
  • Then, select Network Connections from the available option.
  • After that, you should locate the Network Connection.
  • Next, click on the Properties menu. When the Properties window appears on the display, scroll down below and select the Internet Protocol Version 4 (TCP/IPv4) option. 
  • Thereafter, tap on the Properties button. Then, you need to tap on the ‘Use the following DNS server addresses’ option.
  • As soon as you do this, enter the 8.8.8.8 DNS server address. Now, you also have to enter the 8.8.4.4 as an alternate DNS server address.

Once done, then click on the OK button to save the changes being made.

Solution 3: Change the Physical Address

By modifying the physical address too, you can get rid of this error. So, follow the steps given below to alter the physical address.

  • Open the Windows Start menu and type “cmd” in the dialog box. Then tap the Enter key on the keyboard.
  • After that, write ‘ipconfig /all’ in the Command Prompt section and hit the Enter key. Now, you need to find the physical address, and then type it.
  • Again, open the Start menu, write ‘ncpa.cpl’ into the Run box. Then, hit the Enter button and it will display you the proper network connections.
  • Now, choose the Active Connection that you want to use and go to the Properties section.
  • Next, tap on the Configure option and then go to the Advanced tab.
  • After that, tap on the Network Address option and choose the button that shows the Value.
  • Also, write down the network address there that you have typed down before. Make sure that you type it with no dashes.
  • Then, tap on Ok and reboot your device.

Solution 4: Launch the New Driver

If the above two solutions fail to fix the DNS server not responding issue, then here is another alternative that you can try to troubleshoot this issue. Just follow the instructions mentioned in the steps below.

  • First, press the Windows + X keys together on your keyboard. Then select Device Manager from the available option.
  • When the Device Manager window opens, then try to locate the Network Adapter.
  • Once you find it, then right-click on it and select the Uninstall option.
  • Next, a confirmation message will appear on the screen. You should click on the Yes button.
  • Thereafter, mark the dialog box beside the Delete driver software for this device.
  • After that, tap on the Uninstall button to uninstall the driver software.

Once you have deleted the drivers then reboot your PC. When your computer restarts, then the default driver will be installed. Then check and verify if the issue is resolved or not. If you are still dealing with the DNS server not responding, then move to the next solution.

Solution 5: Disable Windows Firewall

Sometimes, simply just by disabling the inbuilt Windows Firewall, you can quickly resolve this problem. For that, proceed with the steps stated here.

  • First of all, open the Control Panel.
  • After that, you have to click on the System and Security link. Then, select the Windows Firewall from the available option.
  • Now, a new page will pop up on the screen.
  • From there, you should drop down and tap on the Turn Windows Firewall On or Off option which might be located at the bottom left corner.
  • Then, mark the dialog box next to the Turn off Windows Firewall option.  

Solution 6: Use Another Browser to Access

Occasionally, no matter what browser you are using, it may prevent you from accessing the internet. At this condition, it will be a wise decision to not take any risks. You can simply use another browser and then check whether you can use the Network without this DNS server not responding or not.

Also, do not forget to restart your computer after implementing this solution. 

Solution 7: Disable and Enable Network Adapter

Disabling and then again enabling the Network Adapter is one of the peculiar solutions to troubleshoot this issue. So, go through the steps stated hereunder to execute this solution on your device.

  • In the beginning, open the Control Panel of your Windows system.
  • After that, navigate to the left pane and click on the ‘Networking and Sharing Centre’ option.
  • Now click on the ‘Change Adapter Settings’ link.
  • Next, by right-clicking on your current Network Adapter, you should select the Disable option.
  • This action will turn off the Network Adapter. Again, right-click on the Network Adapter and choose the Enable option.

Once it is enabled, then check if the issue still persists or not.

Solution 8- Use netsh Command

This is one of the simplest solutions that you can try to fix the DNS server not responding problem.  So, try to run the netsh command with the help of the cited below steps.

  • First, open the Command Prompt as Administrator.
  • When the Command Prompt opens, then enter the given below command and press the Enter key after every command.

netsh int ip reset

netsh winsock reset

ipconfig /flushdns

ipconfig /renew

  • Once all the commands are successfully executed, then again reboot your computer.

After running these commands, your IP address will be reset as well as it will clear the DNS caches. Then, surely this error will not appear anymore.

Solution 9: Reset the Modem

If you detect that the problem is with your computer, then it can be resolved simply by resetting the Modem. 

For that, you should press the Power button on the modem to turn it off. Then, wait for 30 seconds and again, press the Power button to turn on your modem. 

You should wait until the modem completely turns on, then check if the issue still occurs or not.

Solution 10: Start your Computer in the Safe Mode

This is another solution that you might apply to fix the DNS server not responding problem. To enter Safe Mode on Windows 10, you should follow these steps:

  •  Move to the Start menu and tap on the Power button.
  • Next, you should hold down the Shift key on your keyboard and click on the Restart button.
  • Then, you will get to see that three options appear on the screen. Tap on the Troubleshoot button.
  • Next, navigate to the Advanced section. Then, click on the Startup Settings and after that, tap on the Restart button.
  • When your device restarts completely, press the F5 key to start the Safe Mode.

 When Safe mode starts, then you need to undo the recent changes that have been made. Further, check if the error has been resolved or not.

Solution 11: Deactivate Internet Protocol Version 6

There are basically two types of IP address, v4, and v6.  If you come across a DNS server that is not responding to an error on your computer, you might be able to resolve it by disabling version 6.

  • To deactivate it, at first, navigate to the Network Connection.
  • Next, you should right-click on the Network Connection and choose the Properties option.
  • Then, find out the Locate Internet Protocol Version 6 (TCP/IPv6) and disable it.
  • Now, click on the Apply button to save the changes.

 Wrapping Up

If all the above solutions are unable to bring the required solution for you, then the problem might be with the ISP. So, contact your ISP for appropriate solutions.

Also Visit: Discord screenshare no audio

Also Visit: Adobe GC Invoker Utility

Leave a Reply

Your email address will not be published. Required fields are marked *